2,682 research outputs found
Investigation of discrete component chip mounting technology for hybrid microelectronic circuits
The use of polymer adhesives for high reliability microcircuit applications is a radical deviation from past practices in electronic packaging. Bonding studies were performed using two gold-filled conductive adhesives, 10/90 tin/lead solder and Indalloy no. 7 solder. Various types of discrete components were mounted on ceramic substrates using both thick-film and thin-film metallization. Electrical and mechanical testing were performed on the samples before and after environmental exposure to MIL-STD-883 screening tests
A General Mathematical Formulation for the Determination of Differential Leakage Factors in Electrical Machines with Symmetrical and Asymmetrical Full or Dead-Coil Multiphase Windings
This paper presents a simple and general mathematical formulation for the determination of the differential leakage factor for both symmetrical and asymmetrical full and dead-coil windings of electrical machines. The method can be applied to all multiphase windings and considers Görges polygons in conjunction with masses geometry in order to find an easy and affordable way to compute the differential leakage factor, avoiding the adoption of traditional methods that refer to the Ossanna's infinite series, which has to be obviously truncated under the bound of a predetermined accuracy. Moreover, the method described in this paper allows the easy determination of both the minimum and maximum values of the differential leakage factor, as well as its average value and the time trend. The proposed method, which does not require infinite series, is validated by means of several examples in order to practically demonstrate the effectiveness and the easiness of application of this procedure
Static friction on the fly: velocity depinning transitions of lubricants in motion
The dragging velocity of a model solid lubricant confined between sliding
periodic substrates exhibits a phase transition between two regimes,
respectively with quantized and with continuous lubricant center-of-mass
velocity. The transition, occurring for increasing external driving force F_ext
acting on the lubricant, displays a large hysteresis, and has the features of
depinning transitions in static friction, only taking place on the fly.
Although different in nature, this phenomenon appears isomorphic to a static
Aubry depinning transition in a Frenkel-Kontorova model, the role of particles
now taken by the moving kinks of the lubricant-substrate interface. We suggest
a possible realization in 2D optical lattice experiments.Comment: 5 pages, 4 figures, revtex, in print in Phys. Rev. Let
Management of water distribution systems in PDA conditions using isolation valves: case studies of real networks
Abstract
The current paper reports on a case study investigating water distribution system management in emergency conditions when it is necessary to seal off a zone with isolation valves to allow repair. In these conditions, the pressure-driven analysis (PDA) is considered to be the most efficient approach for the analysis of a water distribution network (WDN), as it takes into account whether the head in a node is adequate to ensure service. The topics of this paper are innovative because, until now, previous approaches were based on the analysis of the network behaviour in normal conditions. In emergency conditions, it is possible to measure the reliable functioning of the system by defining an objective function (OF) that helps to choose the optimal number of additional valves in order to obtain adequate system control. The OF takes into account the new network topology by excluding the zone where the broken pipe is located. The results show that the solution did not improve significantly when the number of valves reached a threshold. The procedure applied to other real case studies seems to confirm the efficiency of the methodology even if further examination of other cases in different conditions is necessary
Terminology for contrast-enhanced sonography: a practical glossary.
Objective. The purpose of this glossary is to offer an updated guide to the correct terminology for contrast-enhanced sonography. Methods. This report was prepared by a panel of radiologists from the Sonography Section of the Italian Association of Medical Radiology. A leading author prepared a list of terms based on a comprehensive literature survey. The draft was analyzed by 3 experts on the topic of contrast-enhanced sonography. These reviewers reached a consensus and prepared the final version.
Results. A list of 137 terms is included. These terms are briefly defined. Their proper application is discussed, with special reference to potential misleading uses. Conclusions. Contrast-enhanced sonography is a relatively new diagnostic tool, now entering clinical practice in several countries. Use of appropriate, universal terminology is mandatory in the scientific setting to allow comparison between different published experiences. Additionally, use of clear, standardized terminology is necessary in the clinical setting to facilitate report understanding by the referring physician. Standardized, nonequivocal nomenclature may also help future diffusion of sonographic contrast media in countries
where their application is still not approved
emergency management of water distribution systems the nodal demand control
Abstract During emergency situations (e.g., due to pipe bursts or other network failures), appropriate management of Water Distribution Systems (WDS) is required. Critical events often cause service failures, because the pressure head in some nodes of the network become inadequate to deliver required demand. In this paper, a new methodology is developed based on the nodal demand control. with the aim to increase the pressure head, and hence the flow rate actually delivered at critical nodes (i.e., hospitals, vulnerable customers, etc.). This is done to avoid or minimize service interruptions between the failure and the repair times. Furthermore, a pipe burst can cause isolation of a portion of the network such that the flow along pipes changes and this causes the reduction of head in some nodes. The proposed methodology is manages the delivered flow rate using a Pressure Driven Analysis (PDA) approach. This is based on operating control of valves and by identifying the nodes where the pressure control should be implemented. Those control nodes are chosen by the analysis of sensitivity matrices and the Max-Sum Method (Bush and Uber, 1998; Fiorini Morosini et al., 2014). The methodology is demonstrated on a case study for a real network of Cosenza, a town in the South of Italy
Nonadditive entropy and nonextensive statistical mechanics - Some central concepts and recent applications
We briefly review central concepts concerning nonextensive statistical
mechanics, based on the nonadditive entropy . Among others, we focus on
possible realizations of the -generalized Central Limit Theorem, including
at the edge of chaos of the logistic map, and for quasi-stationary states of
many-body long-range-interacting Hamiltonian systems.Comment: 15 pages, 9 figs., to appear in Journal of Physics: Conf.Series (IOP,
2010
Thermostatistics in the neighborhood of the -mode solution for the Fermi-Pasta-Ulam system: from weak to strong chaos
We consider a -mode solution of the Fermi-Pasta-Ulam system. By
perturbing it, we study the system as a function of the energy density from a
regime where the solution is stable to a regime, where is unstable, first
weakly and then strongly chaotic. We introduce, as indicator of stochasticity,
the ratio (when is defined) between the second and the first moment of a
given probability distribution. We will show numerically that the transition
between weak and strong chaos can be interpreted as the symmetry breaking of a
set of suitable dynamical variables. Moreover, we show that in the region of
weak chaos there is numerical evidence that the thermostatistic is governed by
the Tsallis distribution.Comment: 15 pages, 5 figure
Comparison of three control drive systems for interior permanent magnet synchronous motors
In a previous paper, we proposed a control strategy for interior permanent synchronous motors, which takes into account also the reduction of the motor power losses. The novelty of the suggested approach is that it takes into consideration the variations of all the motor parameters that have an influence on its efficiency. In order to verifyon the field the effectiveness of this new method, we implemented the proposed loss model algorithm in a control drive system and compared its performances, in terms of energy losses with respect to other conventional techniques
- …